Oct 27, 2020

Bearings used for high speed wire rod mill

Leave a message

1. High reliability:

The high-speed wire rod production line has remarkable characteristics and high reliability of continuous operation of rolling mill. Due to the high unit output of the high-speed wire rod production line, it is required that the bearing, as the key component of the rolling mill, has higher reliability than that of the general rolling mill bearing within the specified inspection period. If the bearing failure will cause the whole production line to stop production, this is what the manufacturer can not tolerate. Therefore, in the design and manufacture of high-speed rolling mill bearings, it is necessary to ensure their continuous working reliability under high-speed operating conditions. 

bearings for rolling mills 4

2. Wear resistance:

The bearing of a high-speed wire rolling mill has strong wear resistance and can adapt to high-speed rotation. For example: for a high-speed wire rod production line, the speed of the outlet line is 63m / s, and the working diameter of the roller of the export rolling mill is 330mm, the working speed of the bearing is 3650r / min. long term operation under high speed and heavy load will be a severe test on the wear resistance of the bearing. It is required that the bearings supplied must be wear-resistant. 

3. Long fatigue life:

The bearing fatigue life of a high-speed wire mill should belong. Under normal circumstances, the bearing of a high-speed wire mill provided by foreign countries has been used for three years (since the roller components have to be unloaded for maintenance and repair for half of the time, the actual working time is one and a half years). 

bearings for rolling mills 1

4. Good impact resistance

The impact toughness of high-speed rolling mill bearing is better, especially for the bearing used in roughing mill. The impact load is very large in the process of rolling continuous casting billet into the bar. Therefore, the bearing of high-speed wire rod mills should not be cracked under high-speed and high-impact conditions.


Please check the Product Guide to select suitable bearings for your machinery.


Check more types of Rolling Mill Bearings!


E-mail: sales@tedin-bearing.com




Send Inquiry