TEDIN produces both standard and customized types four row tapered roller bearings. A batch of four row tapered roller bearings are under the final manufacturing process - adjusting the clearance.
1 The assembly procedure shall be as follows.
(1) In the general inspection before assembly, the inspector shall number the rings and make the corresponding inspection records according to the inspection items. The inspector shall indicate the grouping size and quantity after roller grouping.
(2) The technician shall make the calculation according to this record, the size of the roller grouping and the product diagram, and draw the appropriate diagram according to the correct result of the calculation, and the diagram shall indicate the number of the selected ring and the size of the roller grouping used.
(3) Assemblers according to the matching diagram of the ring number, roller size and other given technical data for matching assembly.
According to the above method of assembly will be able to achieve the required assembly high requirements. For the previous generation of the same type of surplus products can also be used through this matching calculation to achieve the purpose of matching assembly into qualified products.
Contact us:
WhatsApp/ Wechat: 8613663889399
E-mail: sales@tedin-bearing.com