TEDIN Bearing Co., Ltd.
Tel.: 0086-379 67301199
M.P: 0086-136 63889399
Thin Section Ball Bearings
Compared with standard bearings, thin section bearings have a fixed cross section size in each series, while in the same series, the cross section size does not increase with the increase of internal size. Therefore, this series of thin section bearings are also known as equal-section thin section bearings. By using the same series of thin section bearings, designers can standardize the same common parts.
Thin section ball bearing is divided in to three type:
1.Thin section angular contact ball bearings (A type);
2.Thin section radial contact ball bearings (C type);
3.Thin section four point contact ball bearings (X type);
According to the different dimensions of crossed section size, the thin section ball bearings also been divided in to KAA series, KA series, KB series, KC series, KD series, KF series, KG series.
Tedin is capable to produce thin section ball bearings, which is substitute for KAYDON slim bearings, with the following specific range:
Inner Diameter: 1.000 inch (25.4mm)-20 inch (508mm)
Outer Diameter: 1.375 inch (34.925mm)- 22 inch (558.8mm)
Weight: 0.011 kg - 6.89 kg;
Material: GCr15, GCr15SiMn, Stainless Steel 9Cr18;