Tapered Rollers
TEDIN produces tapered rollers with a logarithmic profile. The logarithmic profile is the most ideal surface shape of tapered rollers. Traditional tapered rollers often have two problems: the first is that the convexity of the roller is not guaranteed during the processing of superfinishing, especially when the convexity is high; the second, the divergence of the convexity is not easy to control. The contact mode between each roller and the bearing raceway is not uniform, especially in the high-speed working condition, which will affect the precision and service life of the bearing. By adjusting the equipment and tooling, we can directly and accurately process the logarithmic curve required in the grinding process, which can ensure that the rollers’ convexity divergence is very small, and the superfine process mainly improves the surface finish. A more ideal surface profile of the tapered rollers can be obtained without a large amount of superfine.
The runout of the end face of the roller is a very important technical factor, and its size directly determines the rotation accuracy of the bearing, which is more obvious in the tapered roller bearings. The base surface runout tolerance of tapered rollers through the traditional processing method will be very large. Through the modification of the equipment and tooling, we can make the roller base and guide surface completely fit together, then, when grinding the base surface of the roller, and it will not produce runout and yaw difference, so that the roller base surface can be guided with high precision, and the roller base surface runout tolerance is better.
The following are the main parameters of bearing rollers and the accuracy that we can achieve:
1. Diameter variation/ set: 0.003mm;
2. End face roughness: 0.1;
3. Raceway surface roughness: 0.08 (after superfinishing), 0.16 (without superfinishing)
4. Roundness: 0.001mm;
5. Profile: Logarithmic profile.
Roundness Test
Logarithmic Profile Test
Hot Tags: tapered rollers, China, manufacturers, factory, customized, for sale, angular contact ball bearing 7030B, double row angular contact ball bearing 4992X2D W33 4092X2D W33, SX crossed roller bearing SX011814, RA crossed roller bearing RA9008, cylindrical roller bearing NN3148, tapered roller bearing KEE390095 K390200
| Roller Type: | Tapered Rollers for TRB, Cylindrical Rollers for CRB |
| Diameter Range: | φ 10 - φ 160mm |
| Material: | GCr15, GCr15SiMn, Case-hardened steel G20Cr2Ni4A |
| Profile of raceway surface: | Logarithmic profile, crowned profile |
| Diameter Variation/ group: | 0.003mm |
| Roughness (Raceway surface): | Ra 0.08 |
| Roundness: | 0.001mm |
| Application: | rolling mills, wind turbines, crushers, railway, machine tools, etc. |
| Full Test Reports: | Raw Material: Chemical composition, NDT. Heat Treatment: Hardness, case-hardened depth. Logarithmic Profile: Inspection report; Full test report of Geometric Requirements: dimensions, angle, SR, chamfer, tolerance, roughness, roundness, etc. |
