RB30035 for Large Rotary Mechanisms
The RB30035 crossed roller bearing is designed for larger rotary assemblies where bearing size and mounting space are important considerations. Its 300 mm bore makes it suitable for larger mechanical structures requiring a dependable bearing interface within the overall assembly.

Designed for Specific Mounting Layouts
The RB30035 is suited to rotary assemblies with defined shaft, housing, and installation requirements. Its large bore and slim cross section allow the bearing to be incorporated into larger mechanical structures without adding unnecessary bulk around the rotating interface.
For equipment with limited mounting space or a carefully defined internal layout, the bearing can be considered as part of the overall mechanical design from the early selection stage. This helps engineers coordinate the bearing position with adjacent components, shaft dimensions, and housing space more effectively.
Technical Specifications
| Bearing Model | RB30035 |
| Inner Diameter (d) | 300 mm |
| Outer Diameter (D) | 395 mm |
| Roller Pitch Diameter (Dpw) | 345 mm |
| Width (B) | 35 mm |
| Chamfer (rmin) | 2.5 |
| Shoulder Size (ds) | 322 |
| Shoulder Size (Dh) | 368 |
| Basic Load Rating (Radial) Cr | 183 kN |
| Basic Load Rating (Radial) Cor | 367 kN |
| Weight | 13.4 kg |

Applications Across Rotary Equipment
The RB30035 can be selected for rotary equipment with different mounting configurations and operating requirements. Final bearing selection should take into account load conditions, rotation speed, accuracy, preload, and the surrounding mounting structure.
Production Prepared for Delivery

RB30035 bearings are processed through controlled machining, assembly, and inspection stages to maintain consistency throughout production. Each finished bearing is checked before final preparation to help ensure it meets the specified dimensional and quality requirements.
After inspection, the bearings are cleaned, protected against corrosion, and securely packaged for shipment. Packaging methods can be adjusted according to order requirements, helping protect the bearings during handling and transportation.
RB30035: Common Questions
How do I choose the right preload for the RB30035?
+
-
Preload should be selected according to the required rigidity, rotational resistance, load conditions, and operating speed. The appropriate value depends on the specific equipment design.
Can the RB30035 be used under continuous rotation?
+
-
Yes. The RB30035 can be used in continuously rotating mechanisms when the operating load, speed, lubrication, and mounting conditions are within the bearing's specified limits.
What are the signs that an RB30035 needs maintenance?
+
-
Increasing running noise, unusual resistance, excessive play, or changes in rotational behavior may indicate that the bearing requires inspection or maintenance.
Can the RB30035 replace another crossed roller bearing model?
+
-
A replacement should not be based on dimensions alone. Bore and outside diameter, width, preload, accuracy, load requirements, and mounting conditions should all be compared before selecting an alternative.
How should the RB30035 be stored before installation?
+
-
Keep the bearing in its original protective packaging and store it in a clean, dry location with stable temperature and low humidity. Avoid exposure to dust, moisture, corrosive substances, and unnecessary handling before installation.
Hot Tags: rb30035 crossed roller bearing, China, manufacturers, factory, customized, for sale, XU crossed roller bearing XU160405, Crossed Roller Bearings, RE Crossed Roller Bearing RE 50040, RA crossed roller bearing RA11008, XSU crossed roller bearing XSU140544, RE Crossed Roller Bearing RE10016











